Home > Προϊόντα > Ηλεκτρονικό φορτίο DC > Ηλεκτρονικό φορτίο 1200V DC > Ηλεκτρονικός ελεγκτής φορτίου 1200V 8800W
  • Περιγραφή Προϊόντος
Overview
Χαρακτηριστικά προϊό...

Αρ. μοντέλουEL1200VDC8800W

ΜάρκαApm

τόπο καταγωγήςΚίνα

Input Voltage0~1200V

Input Current0~320A

Input Power0~8800W

Voltage Readback Accuracy0.015%+0.015%F.S.

Current Readback Accuracy0.04%+0.06%F.S.

Power Readback Accuracy0.1%+0.1%F.S.

Height7U

Warranty2 years

InterfaceRS232/RS485/USB(Standard)

Δυνατότητα εφοδιασμο...

Συσκευασίαχαρτοκιβώτια

παραγωγικότηταother

Τόπος καταγωγήςΚΙΝΑ

Στήριγμαother

ΠιστοποιητικόISO9001/CE/ROHS/CSA/UL

Κωδικός ΕΣ8543709990

ΛιμάνιDHL

Τρόπος ΠληρωμήςT/T

IncotermEXW

Συσκευασία & παράδοση
Πώληση μονάδων:
Piece/Pieces
Τύπος Πακέτου:
χαρτοκιβώτια
Παράδειγμα εικόνας:

APM Electronic Load Tester has 500kHz high-speed voltage and current sampling rate. It's a constant power electronic load supports timing & discharging measurement for batteries.

APM techonolies also have 200V DC Electronic Load and 600V DC Electronic Load for lower voltage options.Two or more loads can be connected in master-slave parallel mode to provide more power or current capacity to make Dc Electronic Load System with 200V DC Electronic Load System,600V DC Electronic Load System,1200V DC Electronic Load System.
This series Dc Electronic Load can be applied to battery discharge, DC charging station and power electronics and other electronics products.



Functions & Advantages:

Flippable Front Panel and Color Touch Screen
This series programmable DC electronic load is equipped with flippable front panel for 4U, 7U, 10U and 13U height models. Together with a large color touch screen provides simple and fast operation for customer. Real-time update of display input data, status and graphical display makes it more intuitive.


Multiple Operating Mode

This series programmable DC electronic load provides four kinds of basic operating mode including CV (constant voltage), CC (constant current), CR (constant resistance), CP (constant power), to satisfy a wide range of test requirements.


Adjustable CV Loop Speed
This series electronic load supports CV loop response speed setting to FAST, NORMAL or SLOW to satisfy different test requirements. This function may avoid the inaccurate measurement or testing fail caused by the response speed mismatch between the load and the power supply, which is possible to improve test efficiency and reduce costs on the equipments, time and expenses.


Dynamic Load

This series electronic load can be switched quickly between different values in the same operating mode, including CC dynamic mode, CV dynamic mode, CR dynamic mode and CP dynamic mode, CC/CR high speed dynamic mode up to 50kHz. This function is suitable for transient test of power supply, test of battery protection characteristic and battery pulse charging etc. Dynamic mode test has continuous mode, pulse mode and toggle mode.


Sine Wave Dynamic Load
This series electronic load supports sine wave loading function which allows to load sine wave,can be used for impedance analysis test of fuel cells.


Dynamic Frequency Sweep Function

This series electronic load provides a unique constant current dynamic sweep to use frequency conversion to find out the UUT voltage of worst case.
This CC dynamic sweep allows the user to edit two load levels, start frequency, end frequency, step frequency, dwell etc.
The sampling rate is up to 500kHz, which make it can simulate different loading conditions for most test requirements.


Battery Discharge Test
This series electronic load has battery discharge function, and can perform discharge test under CC, CR or CP mode. The DC load can set end voltage or time to stop loading correctly and make sure the battery is not damaged due to over discharge. The user can set stop conditions, whenever met any condition, the load will stop loading and counting automatically. During the test, users can observe battery's voltage, discharging time and already-discharged-capacity.

Auto Mode

This mode allows automatically switches among CV, CR, CC and CP modes. It is suitable for lithium ion battery charger testing to get a complete VI charging curve. This flexible auto mode also enormously improve test efficiency.


OCP/OPP Tests

This series electronic load provides OCP and OPP modes are mainly applied in over-current and over-power points tests. After the testing the load can automatically judge the test result according to the set specifications. Take OPP testing as example, the OPP provides ramped up power for the load to test the UUT voltage whether has reached trigger voltage level and to judge if the protection is acting normally or not.


List Mode

The list function allows user to create waveform files to automatically simulate various complicated loading conditions. The list mode has 10 files, by editing operating mode (including CC, CV, CR,CP, Short and ON/OFF), repeat times, total steps, setting value of each step and step time etc. This function can be applied to the testing of output characteristic and stability for power supply.


Master/Slave Control

This series electronic load provides the user with Master/slave mode, supports parallel connection under different power and same voltage and dynamically synchronized. In Master/slave mode, the user only need to control the master one, the load current will be automatically calculated and downloaded to the slave loads. The Master/slave mode greatly simplifies the operation when increased power is needed.


External Control and Current/Voltage Monitoring

This series electronic load has analog control interface to control the input voltage and current. The external signal 0 to 10V controls the sinking condition from 0 to full scale. Using the external control mode can simulate arbitrary waveform which is ideal for industrial control requirement.
The 0 to 10V analog output signal of V-MON/I-MON terminals represent input to which the terminals belong from 0 to full range.
An external voltmeter or oscilloscope can be connected to display input voltage/current change.


Difference between Advanced Version and Professional Version



Κατηγορίες Προϊόντων : Ηλεκτρονικό φορτίο DC > Ηλεκτρονικό φορτίο 1200V DC

Επισκόπηση της εταιρείας
Η APM Technologies (Dongguan) Co., Ltd. είναι μια επιχείρηση υψηλής τεχνολογίας που εξειδικεύεται στην έρευνα και ανάπτυξη (Ε & Α), παραγωγή και διανομή θαλάσσιου έξυπνου συστήματος (MSS), PV Solar Inverter, Προγραμματιζόμενο τροφοδοτικό , αυτοματοποιημένο σύστημα δοκιμών και αυτοματοποιημένο εξοπλισμός κατασκευής. Η εταιρεία μας διαθέτει πλήρη συστήματα στον προγραμματισμό προϊόντων, την έρευνα και την ανάπτυξη, το εργαστηριακό πείραμα, τον έλεγχο και τον ποιοτικό έλεγχο. Επιπλέον, έχουμε περάσει τις τυπικές πιστοποιήσεις ISO 9001. Η ομάδα Ε & Α της APM Technologies αποτελείται από περισσότερα από 100 προσωπικό που περιλαμβάνει Ph.D. και κάτοχοι μεταπτυχιακών σπουδών καθώς και ανώτερους εμπειρογνώμονες στις σχετικές βιομηχανίες. Συνεργαζόμενοι με μια σειρά εγχώριων και διεθνών ερευνητικών ομάδων και διατηρώντας μια μακροπρόθεσμη στρατηγική συνεργασία με τα κορυφαία κολέγια και πανεπιστήμια, η εταιρεία μας μπορεί να εξασφαλίσει ότι τα προϊόντα και οι υπηρεσίες οδηγούν τη βιομηχανία. Μέσα από την εφαρμογή των επαγγελματικών τεχνικών και των τεχνολογιών μας για να καινοτομούμε συνεχώς και να σπάσουμε, μέχρι στιγμής η APM Technologies έχει υποβάλει αίτηση για έναν αριθμό διπλωμάτων ευρεσιτεχνίας εφεύρεσης και έχει ήδη λάβει έναν αριθμό διπλώματος ευρεσιτεχνίας, διπλώματα σχεδιασμού, πνευματικά δικαιώματα λογισμικού και άλλα συναφή διπλώματα ευρεσιτεχνίας. Τα προϊόντα μας έχουν περάσει τις πιστοποιήσεις CE, VDE, SAA, CQC, CSA, FCC κ.λπ. Οι τεχνολογίες APM από την αρχή μέχρι σήμερα και από το παρελθόν στο μέλλον διατηρούσαν πάντα το πνεύμα της εταιρείας "συνεχούς επιδίωξης της αριστείας", ώστε να παρέχει στους πελάτες μας "24 ώρες την ημέρα συνεχών υπηρεσιών".
Φωτογραφίες της εταιρείας
Πιστοποίηση παραγωγής
Κατεβάστε
Home > Προϊόντα > Ηλεκτρονικό φορτίο DC > Ηλεκτρονικό φορτίο 1200V DC > Ηλεκτρονικός ελεγκτής φορτίου 1200V 8800W
ΗΛΕΚΤΡΟΝΙΚΗ ΔΙΕΥΘΥΝΣΗ σε αυτόν τον προμηθευτή
  • *Θέμα:
  • *Προς το:
    Ms. Emily Cui
  • *ΗΛΕΚΤΡΟΝΙΚΗ ΔΙΕΥΘΥΝΣΗ:
  • *μήνυμα:
    Το μήνυμά σας πρέπει να είναι μεταξύ 20-8000 χαρακτήρες
Αποστολή Εξεταστική
*
*

Σπίτι

Product

Phone

Σχετικά με εμάς

Έρευνα

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Αποστολή